587,252 active members*
3,600 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > Interfacing MO-CON501/Little blue TB6560 manual controller
Results 1 to 20 of 54

Hybrid View

  1. #1
    Join Date
    Feb 2011
    Posts
    102

    Getting HCPL 2531 ICs

    I'v been looking at getting some hcpl2531--it seems to be recommended by several people--I don't want a problem with the wave forms like the TB6560 boards optoisolators and then have to fix that. The problem is that most of the suppliers of small quantities of these are in China and it will take two weeks or more to get here. When buy here in the US the prices are way higher. I just tried to buy on ebay from the "Little Diode" store and he wanted $9.95 apeice for them I wanted to buy ten so $95.00 for just the ICs?
    I offered $2.50 ea and he came back with $8.50 ea. Should I accept? Or just bite the bullet and wait for some to come from China at $0.50--$1.00 each?

  2. #2
    Join Date
    Jan 2010
    Posts
    2141
    If I'm reading it correctly, Mouser shows various versions of that opto in stock, mostly for $2.50 or less in small quantities, and a price break at 25 units.

    Mouser Electronics - Electronic Component Distributor hcpl2531

Similar Threads

  1. How I fixed my Chinese TB6560 controller (updated)
    By lasik2025 in forum CNC Machine Related Electronics
    Replies: 899
    Last Post: 06-17-2020, 02:47 AM
  2. Mac 3 setup for TB6560 controller board
    By davidarf in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 07-03-2012, 09:05 PM
  3. Burning up my TB6560 controller card for second time....
    By Vegabond in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 02-07-2011, 02:04 AM
  4. 3 Axis TB6560 Driver Controller motor sizing
    By crazydiamond in forum Stepper Motors / Drives
    Replies: 4
    Last Post: 01-05-2011, 02:21 PM
  5. TB6560 3-axis driver manual control
    By kish89 in forum Stepper Motors / Drives
    Replies: 4
    Last Post: 12-08-2009, 10:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •