Unplug the 6 pin green plug out of the power supply and press the black test button. When your laser fires the tube turns pink. If it still doesn't fire then your laser tube is bad. If it does fire then likely your control card power output DAC is bad.
We can sell you whatever parts you need out of Las Vegas, NV, USA.
Visit our website at Home page
Thread: Laser will not fire
Results 1 to 7 of 7
Hybrid View
-
07-09-2011, 11:07 PM #1
Registered
- Join Date
- Aug 2009
- Posts
- 127
Reply With QuoteSimilar Threads
-
fire clay/fire rock
By banctecbobn in forum Casting MetalsReplies: 10Last Post: 12-12-2009, 11:14 PM -
no laser fire at low power setting
By bgirit in forum Laser Engraving / Cutting Machine General TopicsReplies: 11Last Post: 09-19-2008, 01:38 AM -
Laser won't fire
By CARTOGATE in forum Laser Engraving / Cutting Machine General TopicsReplies: 3Last Post: 08-25-2008, 08:22 AM -
using gas to stop fire on 3040 laser?
By StarLoc in forum Laser Engraving / Cutting Machine General TopicsReplies: 0Last Post: 06-25-2008, 07:20 PM -
Smoke and fire...yes FIRE!
By fatal-exception in forum Gecko DrivesReplies: 13Last Post: 01-25-2008, 08:58 PM
Posting Permissions
