Hi Michel.
The specs you have given are for a 124V 2A Series connected motor. If wired in Series, it will not be a good match for G540. However, wired Parallel, it would be a 61V 4A motor, and a VERY good match. At the G540 Max 3.5A, it would detune slightly to 770 Oz.
I don't have any wiring color diagram to go by, so I really hope that the wiring instructions from Keling are for Bipolar Parallel and NOT Bipolar Series.
CR.
Thread: 8 wire steppers connection
Results 1 to 20 of 24
Hybrid View
-
09-27-2010, 04:56 AM #1
Registered
- Join Date
- Mar 2008
- Posts
- 3655
http://crevicereamer.com
Too many PMs. Email me to my name plus At A O L dot com.
-
09-28-2010, 01:02 AM #2
Registered
- Join Date
- Sep 2009
- Posts
- 14
thank you crevice
i attach the diagram that i reiceved from the chineese seller, i am pretty sure that you do not understand chineese, but you will certainly understand better than me according to this diagram.
i want like you suggest, to connect those motors in parralel
do you mean that for a parallel connection, i need a power supply with 61v 4amp, do you know a place where i can buy one like that.[ATTACH][/ATTACH]
Reply With QuoteSimilar Threads
-
8 wire Stepper motor wiring connection
By hornet in forum Stepper Motors / DrivesReplies: 8Last Post: 01-25-2013, 07:52 AM -
Connection layout of Fanuc Wire Cut machine
By Namnp2007 in forum FanucReplies: 0Last Post: 08-14-2010, 01:19 AM -
5 wire Sanyo Denki connection Diagram Needed
By Fonfon in forum Stepper Motors / DrivesReplies: 4Last Post: 04-06-2010, 11:52 AM -
How to wire G203v disable connection with BB Estop circuit
By Dale gribble in forum Gecko DrivesReplies: 3Last Post: 12-21-2009, 01:56 PM -
4 wire steppers
By Gus_452000 in forum Stepper Motors / DrivesReplies: 1Last Post: 09-19-2007, 06:51 PM
Posting Permissions
