Hi CNC Zone:
We've released two new free Sprut tutorial videos:
25008 - Machining 3D Surfaces in SprutCAM
and
25009 - SprutCAM’s Text Generator
Visit Tormach.com to view.
http://www.tormach.com/videos_cadcam.html
Hi CNC Zone:
We've released two new free Sprut tutorial videos:
25008 - Machining 3D Surfaces in SprutCAM
and
25009 - SprutCAM’s Text Generator
Visit Tormach.com to view.
http://www.tormach.com/videos_cadcam.html
Thanks for the tutorials!
Question:
I am going to install Windows 7 professional 64 bit and would like to know if SprutCam 2007 will run on the new OS?
Thanks for the Tutorials again. I wonder if the part you have been creating in the tutoials has any practicle use. Maybe we should all make on for some reason. Is it a pencil and paper clip holder?
Stephen
Austin TX.
Hi CNC Zone:
Here is another new SprutCAM tutorial. SprutCAM 7 has a new multiply toolpath by array feature which quickly populate repitive features on a part. Enjoy!
http://www.tormach.com/videos/25010_...ply_Array.html
Hi 'zone:
We've just put up a new Sprut Tutorial on 4th axis programming
Check it out at: http://www.tormach.com/videos_cadcam.html
Also, we are going to hold a SprutCAM workshop on March 23. Details are here: http://www.tormach.com/workshops.html.
You can purchase it as a stand alone class or in conjunction with the CNC Fundamentals Workshop.
Regards
Andy Grevstad
Tormach
Any news on Sprutcam 7?
David
Hi CNCzone:
As many of you already know, SprutCAM 7 is now available for purchase or upgrade at www.tormach.com.
We've also added 3 new tutorials in the last week or so:
25012 - SprutCAM7 Thread Milling
25013 - SprutCAM7 2D Lines
25014 - SprutCAM7 Lathe Turning
http://www.tormach.com/videos_cadcam.html
Some of these are a little longer so you won't be able to find them on Youtube.
Regards
Andy Grevstad
Tormach