[gus]

if it still says that, you are not homed

power on

"CE"

Power enable

feed rate override at ~100 percent

cycle start [wait]

cycle start[wait]

cycle start[wait

cycle start[wait]

cycle start[wait]

cycle start[wait]


As each axis is homed, with a max of 2 moves per axis, that line should disappear

until it is homed, it will do nothing else

[gugu]

Aha! It seems to work now I followed the sequence you told me, and the axes home, but after the axes are homed, they still move a little bit, even though the little yellow light ( the "Indicator lamp") is OFF. Now i'm trying to learn how to enter a program into the machine. I'm thinking to sell the machine and that's why i try to turn it on and run a program on it so that the customer can see it works. I'll read through the manual and see how to program it and if i have other questions, i'll ask for your help Thanks.

[gridley51]

Gugu,
here is a link to the manuals.

http://filebase.heidenhain.de/doku/o...76/N13776.html

Mark.

[gugu]

Question: When entering a program into the memory, how do i enter things like A X 100* R0 F 9999? What button should i press so that i can "type" A X?

[gugu]

Hi. I need the electric schematics for Bridgeport Series II Interact 2. Do you know where i can find them? Thank you.

[gus]

I believe one has been posted here previously. try looking in this sub forum for posts with attachments

[ichudov]

Hi. I need the electric schematics for Bridgeport Series II Interact 2. Do you know where i can find them? Thank you.

I have a electric schematic posted right here:

Bridgeport Series II Interact 2 CNC Mill ==> Schematic

[Dirky]

if it still says that, you are not homed

power on

"CE"

Power enable

feed rate override at ~100 percent

cycle start [wait]

cycle start[wait]

cycle start[wait

cycle start[wait]

cycle start[wait]

cycle start[wait]


As each axis is homed, with a max of 2 moves per axis, that line should disappear

until it is homed, it will do nothing else

Gus...please help me out....when I push the cycle start button on my series 2 intact 2 it does nothing...should it buz or fart or spit....also the feed rate knob is so sensitive that simply touching it will cause a jump from 100 to 80 or 120 etc...this is the first time I have tried to start this machine...I have no idea what behaviour to expect....not certain if I am dealing with a program issue or hardware problems....also a note the air spindle brake will not switch to the off position help....and yes I have read the manual....but it goes about everything as though you are starting with a working machine.