Hi
I have been trying to work this out, looked through the manuals (which actually show examples but dont work), but have found nothing to work.....
Is it possible to enable any of the G83 onwards functions.
I believe this to be a peck drilling cycle with the retract to the original start position and rapid back down the hole.
All I want to do is drill, although currently do use manual programming i.e. G01...G00...etc, which can become tedious. I know the OT doesn't allow macro without making some heavy purchase,or maybe this is just a parameter, everything seems to be a parameter in Fanuc , so basically would just like to enable G83, if at all possible.
thanks for any help......