what causes a real-time board failure ? PN: 3-424-2169A03
the cmos battery is at 3.084v could it be the battery
bad contacts ?
or failing power supply?
what causes a real-time board failure ? PN: 3-424-2169A03
the cmos battery is at 3.084v could it be the battery
bad contacts ?
or failing power supply?
Hi,
that problem has been reported before. My understanding is that replacing the battery, while required, will not fix it. Critical data has been lost and needs be repopulated before it will run again.
There are various repair companies whom do this.
Craig
You can not replace the battery without deleteing the BIOS on the board unless you have a parallel voltage
MIKE E
http://cncmachineservices.com