Moglice claims they can use their stuff to replace 'ways' not linear rails, the difference being that ways are generally hydrodynamic as they work in conjunction with oil. The oil in injected between the ways and the unit traveling on the ways [for the life of my I can't remember then 'name'] and this keeps the upper structure from ever actually 'touching' the ways do to this oil cushion, at least in theory.
In reality the only thing I moglice is good at is emptying a person's wallet. I priced out using it on my machine and the price would have been something like $6k, devcon liquid steel B would have been less than 1/2 of this and the Epoxy I did use was still $500 or so..
If a guy had the buck's it might be ok, but I'd [personally] be looking elsewhere for my needs in the future. I have no doubt its a great product! So great infact that its worth its weight in gold..[or possibly platinum]
vger, for doing nuts is REALLY where it would excel, I could see myself using it for this if I ever had a need. I did get the pricing someplace but can't find it on short notice [its probably at home]. However , if someone is really serious about getting some I do have a contact who sells it and I talked to about it. I won't post it up here as it wouldn't be fair to the man [ I can just imagine the kinda call's he'd get because off the crawlers on the web... he'd have won so many fee satillite dish's that he'd own half the network ]
Best
Jerry
JerryFlyGuy
The more I know... the more I realize I don't
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)