makaplan

have you got any help?

a new ncstudiocard cost around 35..

same way you can buy another breakout board for 30-50 and run mach3.. from computer
but that going to be way slower due to printerport

ncstudio connected to computer via pci slot , a similar card you say modern starts with 1000 plus

there are for mach3 cards like ESS smoothstepper they also cost hundreds..

trough on ncstudio you have toolzero, spindle set correctly, also it recognizes most Gcode..

I have two machine using ncstudio..
not really need support because all question go back about setup jobs..

program itself stable, and within 7 years, I ordered in 2011.. it never crashed