Re: Considering the FLA100 2x3 Machine
Originally Posted by
canman77
Hi everyone,
It is about time for me to upgrade to a better machine...the Chinese 3040 can't do the bigger jobs I'd like to do. We have space in the garage for a 2x3 machine...but Nate's 2x3 is the only one with a small enough footprint for the dedicated space.
Looks like a great machine, people speak highly of it. I only plan to use it for hardwood and plastic, I don't do any aluminum. I make a lot of ukuleles and the occasional guitar, along with signs for local businesses, etc. so I'd love something that can cut deeper and faster than my current machine.
Is this machine sturdy enough to hold a spindle/router that can cut 1/4" passes, maybe up to 1/2" deep through something like hard maple? I use 1/4" and 1/2" bits right now but can only go about 2mm deep on each cut without stressing my 800w spindle too hard. And can this machine cut 100ipm+ at say, a depth of 1/4" without issue? My machine right now can barely do 80ipm, with the occasional stall.
Obviously, deeper and fast cuts will significantly increase production time. We have a 2hp Harbor Freight dust collector in the garage, so with dust collection, I'm hoping to keep the garage dust free.
I know this machine isn't as rigid and sturdy as the 2x4 foot machines FLA offers but space is an issue, so this size will have to do. Do those of you who have experience with this machine think it could manage what I'm asking?
Thanks!
In hardwoods and plastics we’ve done 150ipm cuts with a 1/4in bit at a 1/2in depth of cut using a 2.5 HP hitachi router and NEMA 23 motors on the 2’ x 3’ without any issues. I think it could be pushed a little more too. Rapid rate is 250ipm. It should exceed the performance envelope you described.
Fine Line Automation
www.finelineautomation.com