Hi all,
Simulating the SprutCAM demo example file "Bottle" I noticed that on the screen the spindle is rotating after a tool change but on my milling machine it stays off after the tool change resulting in crash!
In PostProcessor Gcode (Mach3.spp) in the beginning of the program a M3(Turn Spindle CW) is initiated after M6(Tool Change).
After that any other M6 is missing the M3 command resulting in XYZ-movement without spindle milling.
Manual editing of the Gcode is what I do until now but can"t be the solution though.
So, what am I doing wrong here and where to set Spindle turning after a ToolChange?