[The Wolf!]

i am just not seeing what the damn problem is??????????????????????

here is the program that it is alarming out on. any help would be great. and this is genarated straight from onecnc????????????????????? please help lol

N2 T404 (VNMG TURN)
G50 S1250
G96 S750 M03
/M08
G00 X0.745 Z-0.9183
G71 P40 Q43 U0.025 W0.005 D0.025 F0.002
N40 G00 X0.7222
G01 Z-0.9497 F0.002
X0.3815 Z-1.315
N43 X0.745
G70 P40 Q43
G00 Z0.1 M09
X10. Z12.
T400
M01

im using a st-30 haas lathe.
thanks in advance for the help.

[djm77]

You are trying to move in the X- you need to have the X and Z dimension in the first G01 move so it knows you are trying to use type 2 movement. It's all in the Haas manual under G71. I would have N40 G00 X0.7222 Z-0.9183. Next line. G01 X0.7222 Z-0.9497 F0.002


Sent from my iPad using Tapatalk

[The Wolf!]

thanks bud, ill try that in the morning. wonder why onecnc puts it like that, lol

[djm77]

We program all our lathes by hand, but we do have a seat of OneCNC that we use for our mills. I'm not in front of mine today as I don't work Friday's but we have edited the generic Haas mill post to suit what we want. There may be a button to click that puts the X and Z in on all lines. It'll make your programs bigger but at least it would make sure you don't have this problem again.


Sent from my iPad using Tapatalk

[The Wolf!]

adding the z to the N40 line worked. going to mess with onecnc and see if i can manipulate it. to spit out the right code.
thanks for the help boyz
ron

[LeWhite]

N40 G00 X0.7222 W0.0 F(for G70 only);
(G71 F should be more like .008);

[The Wolf!]

tight tolerance odd shaped groove, using a vnmg. so .002 is conservative and trouble free.

[LeWhite]

How's the ST30 working out for you. Have you ever thouht it was too big? Would you buy it again

[The Wolf!]

How's the ST30 working out for you. Have you ever thouht it was too big? Would you buy it again

it was already here. it works well for everything i do. if i was to by one i would buy something smaller, with out the tail stock. ive been here for 2.5 yrs and have never used it. lol