Hi,
I'm trying to eliminate resonance of the workpiece with code such like this:
G97 S500 M3
G0 X100 Z2
G1 W-2 S400
G1 W-2 S500
G1 W-2 S400
G1 W-2 S500
...etc
It works, but on every line the feed stops until the spindle is up to the new speed, ruining the surface finish. How do I make it so that the movement is smooth?
The machine is a Puma 400 LM with Fanuc 18i-T control.
THANKS A LOT!!!