Today is the Y axis screw assembly . Length of the lead screw overall is 41 3/4 " or 1060.45 mm , motor end has inset for bearing /washer and snap ring and coupling of 3/4 " or 19.05 mm , Huco coupling 1/4 inch dia opening for 1/4 inch dia motor shafts for all 3 axis motors .
Other end of lead screw has the same compression spring as the Z axis set up . So here then are the pics as best as can be . Attachment 274468Attachment 274470Attachment 274472Attachment 274474Attachment 274476Attachment 274478continued in next thread reply .
Results 1 to 20 of 32
Hybrid View
-
03-28-2015, 09:11 PM #1
Registered
- Join Date
- Feb 2014
- Posts
- 94
Re: They arrived , Gerber Dimension 200 e times 2 .
-
04-07-2015, 06:05 AM #2
Registered
- Join Date
- Feb 2014
- Posts
- 94
Re: They arrived , Gerber Dimension 200 e times 2 .
A few pics of the system test . You tell me if this is looking pretty darn good so far .
Attachment 275794Attachment 275796Attachment 275798Attachment 275800
Reply With QuoteSimilar Threads
-
G & M Code on a Gerber Dimension 200
By quaturbo in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 06-16-2012, 01:15 AM -
My Gerber Dimension 200 router needs help!
By markrobertsigns in forum Want To Buy...Need help!Replies: 0Last Post: 04-02-2010, 12:16 AM -
Looking for Gerber Dimension 200
By gio666 in forum Community Club HouseReplies: 0Last Post: 06-01-2008, 03:32 PM -
Looking to buy a gerber dimension 200
By gio666 in forum Canadian Club HouseReplies: 0Last Post: 05-27-2008, 08:39 PM -
Gerber Dimension 200
By teemac in forum GerberReplies: 1Last Post: 04-22-2007, 05:30 AM
Tags for this Thread
Posting Permissions
