It looks like your power supply is good - more than enough amperage. You're running in the right RPM range... I'm kind of at a loss.Originally Posted by CS900
Might try swapping them out with your smaller ones and see how it runs.
I'd contact the supplier for support in this case
Results 1 to 20 of 38
Hybrid View
-
11-11-2014, 02:08 PM #1
Registered
- Join Date
- May 2014
- Posts
- 182
Re: need some assistnace with closed loop stepper set-up
Reply With QuoteSimilar Threads
-
Open Loop to Closed Loop Stepper Conversion
By beamhome in forum Stepper Motors / DrivesReplies: 11Last Post: 03-09-2014, 11:27 PM -
Encoder connection from closed loop to semi-closed loop
By botha.y in forum FanucReplies: 0Last Post: 03-13-2012, 11:15 PM -
Closed loop with stepper motor?
By mtndrew77 in forum Stepper Motors / DrivesReplies: 11Last Post: 10-08-2009, 04:36 PM -
Stepper motors Closed loop
By funkmonkey in forum Stepper Motors / DrivesReplies: 0Last Post: 07-17-2009, 09:53 PM -
Closed-Loop stepper control
By mmjpotter in forum Stepper Motors / DrivesReplies: 2Last Post: 10-09-2006, 09:16 PM
Tags for this Thread
Posting Permissions
