You can follow my build here
http://www.cnczone.com/forums/xzero_...ml#post1414758
and here with more of a 3d printer perspective:
Woodworking router with BulldogXL Extruder [Build] - Page 2
You can follow my build here
http://www.cnczone.com/forums/xzero_...ml#post1414758
and here with more of a 3d printer perspective:
Woodworking router with BulldogXL Extruder [Build] - Page 2
Still Learning.....
New 12 inch travel Z axis plate for Demon machine Attachment 223186Attachment 223184
XZero cnc
Hi, George:
The latest job the Viper.
.
That looks nice and clean, small machine cuts nice.
I have got so many emails for Viper machines,so i will have the ViperXZ 30 for a bit.
also new size ViperXZ 24. with leadshine 3 axis motor kits. 24x18 / 24x24 / 24x30 and 24x36 with all 25mm rails
Will have pricing on my forum shortly.
XZero cnc
Have 4x4 56x65 travel 49x56 complete, just waiting for ballscrews to arrive for photos.
Demon machine has lots of changes from all the Demon on youtube.
Machine has leadshine Nema 34 easy servo 1100oz 4 axis or leadshine 3 axis driver and 600oz Nema 34 with use of single ballscrew
XZero cnc
Demon end frames 56 inch , single or dual 2525 ballscrews. 4 8080 profiles
Attachment 223774
XZero cnc
You know my address... :-P
"Envoyé depuis mon HTC One avec Tapatalk"
Here first version of Demon machine. Cuts molds daily in rigid foam. very hard stuff.
XZero cnc
Setting up 750oz servo set up and controller
XZero cnc
Demon and Raptor 24 or 30 now have single X prox switch , also machines have the MX3660 and 283oz or 383oz motor kits
Attachment 225212. Attachment 225214
XZero cnc
Easy servo Nema 34 600 oz to 1100 oz
. Attachment 226692
XZero cnc
Looking good!
That blue color looks really good! Stands out from the rest
Still Learning.....
New ViperXZ 24
24x24 _ Travel 18x18
24x30 - Travel 18x24
24x36 - Travel 18x30
With Leadsine MX3660 / 3 283oz steppers and 48v power supply
25mm Rails X and Y
3/4 inch 6061 aluminum
1610 Y Precision Ballscrew
2010 X Precision Ballscrew
6 inch travel 20mm rails Z axis with 1605 Precision Ballscrew
4080 Structural profiles
Flexible couplings
Motor mounts Nema 23
Double row angular contact ballscrew bearing
Cable Chain
Prox switches
Options
Thomson USA Precision shafting
XZero cnc
:wave:
Also updated Raptor 24 available in a week.
Limited amount of low cost 3D printers , no printed parts, dual or single all aluminum extruder, Thomson rails. Blue or Red case
XZero cnc
Leadshine MX3660 , mounts to back end frame on Viper and Raptors
Info here index
Attachment 227956 Attachment 227958 Attachment 227960
XZero cnc