[chucker]

Hi Guys
Hope someone can help me I am a new MC user using Ver 7 doing a 2D High Speed (2D Dynamic Rest Mill) I have a 2.5 dia hole I am milling it out to be a 2.515 square with .5 radius in the corners.
When I post out the tool path I get a whole bunch of XY moves on the return path it makes the program very large is there any way to suppress these XY moves and make the program smaller or there a reason for them that I am not seeing.
Thanks for the help
(T239 - 1/2 FLAT ENDMILL - H239 - D239 - D0.5000")
G00 G17 G20 G40 G80 G90
G91 G28 Z0.
(COMPENSATION TYPE - COMPUTER)
T239 M06 ( 1/2 FLAT ENDMILL)
(MAX - Z.25)
(MIN - Z-.74)
G00 G17 G90 G54 X-.9519 Y-.0507 S12000 M03
G43 H239 Z.25
G94
G61.1
G05 P2
G01 Z.1 F500.
Z-.74 F200.
X-.9805 Y-.1157 F500.
G03 X-.99 Y-.161 I.103 J-.0453
G01 Y-.1875
Y-.2051
Y-.2226
X-.9894 Y-.2325 All these XY Moves
X-.9883 Y-.2432
X-.9869 Y-.2545
X-.9851 Y-.2663
X-.9829 Y-.2785
X-.9804 Y-.291
X-.9775 Y-.3038
X-.9743 Y-.3167
X-.9708 Y-.3297
X-.967 Y-.3429
X-.9629 Y-.3561
X-.9586 Y-.3693
X-.954 Y-.3825
X-.9492 Y-.3957
X-.9441 Y-.4089
X-.9388 Y-.4221
X-.9333 Y-.4352
X-.9276 Y-.4482
X-.9216 Y-.4612
X-.9154 Y-.4741
X-.9091 Y-.487
X-.9025 Y-.4997
X-.8957 Y-.5124
X-.8888 Y-.5249
X-.8816 Y-.5374
X-.8743 Y-.5498
X-.8667 Y-.562
X-.859 Y-.5742
X-.8511 Y-.5862
X-.843 Y-.5981
X-.8347 Y-.6099
X-.8263 Y-.6216
X-.8176 Y-.6331
X-.8088 Y-.6445
X-.7999 Y-.6558
X-.7907 Y-.6669
X-.7814 Y-.6779
X-.772 Y-.6888
X-.7623 Y-.6995
X-.7525 Y-.7101
X-.7426 Y-.7205
X-.7325 Y-.7308
X-.7222 Y-.7409
X-.7118 Y-.7509
X-.7013 Y-.7607
X-.6906 Y-.7704
X-.6797 Y-.7799
X-.6688 Y-.7892
X-.6576 Y-.7984
X-.6464 Y-.8074
X-.635 Y-.8162
X-.6235 Y-.8249
X-.6118 Y-.8334
X-.6 Y-.8417
X-.5881 Y-.8498
X-.5761 Y-.8578
X-.564 Y-.8655
X-.5517 Y-.8731
X-.5394 Y-.8805
X-.5269 Y-.8878
X-.5143 Y-.8948
X-.5016 Y-.9017
X-.4888 Y-.9083
X-.476 Y-.9148
X-.463 Y-.921
X-.4499 Y-.9271
X-.4368 Y-.933
X-.4235 Y-.9387
X-.4102 Y-.9442
X-.3968 Y-.9495
X-.3833 Y-.9545
X-.3697 Y-.9594
X-.3561 Y-.9641
X-.3424 Y-.9686
X-.3286 Y-.9728
X-.3148 Y-.9769
X-.3009 Y-.9808
X-.287 Y-.9844
X-.273 Y-.9878
X-.2695 Y-.9887
G03 X-.258 Y-.99 I.0115 J.0487 Cutting here
G01 X-.2404
X-.2227
X-.2051
G03 X-.0943 Y-.897 I0. J.1125
X-.125 Y-.7985 I-.1108 J.0195 F100.
G01 X-.7974 Y-.1171
G03 X-.897 Y-.0853 I-.0801 J-.079
X-.99 Y-.1961 I.0195 J-.1108 F500.
G01 Y-.2226
Y-.2402
Y-.2579
Y-.2662
X-.9896 Y-.2749
X-.9888 Y-.2845
X-.9876 Y-.2948
X-.986 Y-.3057
X-.9839 Y-.3171
X-.9815 Y-.3288

[Bm150]

Turn on arc filtering

Sent from my HTC One using Tapatalk

[cadcam]

Also look at your post in the Main Mastercam forum you posted.

[chucker]

Thank for the help this is just what I was looking for