TrickyCNC,
Did you try viewing the other fonts listed?
TrickyCNC,
Did you try viewing the other fonts listed?
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Yes... if you click on them it says BuyOnLine
My 1st Build (ongoing) http://www.cnczone.com/forums/diy-cnc_router_table_machines/134670-one_big_one_smaller_my.html
Maybe this might work for your project:
Pacifico font by New Typography - FontSpace
http://www.fontspace.com/category/cursive
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Thanks , for the suggestions
I was just about to buy Susa... but then it starts asking me for registaration etc etc ... so I thought I'd check here before I went through all that ! ...
I'm cutting out the words, so Susa suits well because it has not tapered lines ... it's pretty uniform.
Looks like I'l register and buy it
Thanks again
Rich
My 1st Build (ongoing) http://www.cnczone.com/forums/diy-cnc_router_table_machines/134670-one_big_one_smaller_my.html
Attachment 205066
Attachment 205068
Here are 2 pictures of the sprockets I cut. The second picture is the sprocket next to a stock 1952 Monark Bicycle one.
Thanks for the grape drawing KKBERG . What kind of bits do you use to cut it? Also any more grape clusters for carving? Im new to cnc and trying to learn how to carve them.
I use 60 degree V-bit, but it depends on how you want to engrave it.
Any one got Christmas dxf's of any kind? looking for ideas to laser cut
Hey, was just checking out your pic... very cool. I can in 2d and it will take some time. let me know if your still in need. (JM)
who cam make these dxf files ? and or how is it done
Good day all. Can some one please help this NEWB out? I need to convert this jpeg to a burnable (plasma) dxf any help would be greatly appreciated.Attachment 207054
would someone like to convert these to a dxf for me?
can either one of these work?
what would your like
thanks for helping