I have just replaced my Nema 23 3 amp 120 oz motors with some 454oz 3 amp motors. Everything is working well with the exception of my Home/Limit switches will trip in Home/Limit mode and over-travel in home mode. Wondering what I can check for to try and remedy problem. I replaced Molex connecters with DIN connectors as the new motor had DIN, the metal body of the DIN female connector on motor box grounds to the chassis the plastic Molex did not. Wondering if this is a potential issue.
Any advice is appreciated,
Results 1 to 2 of 2
-
06-28-2013, 04:41 PM #1
Registered
- Join Date
- Dec 2007
- Posts
- 73
Replaced now homing is not working
-
06-29-2013, 06:21 AM #2
Registered
- Join Date
- Dec 2007
- Posts
- 73
Solved. Uninstalled and reinstalled software.
Reply With QuoteSimilar Threads
-
anyone replaced fadal transformer?
By dougputt in forum FadalReplies: 8Last Post: 04-05-2013, 01:47 AM -
Homing switches working...sort of.
By Lasr Da Vinci in forum Machines running Mach SoftwareReplies: 1Last Post: 08-25-2012, 12:08 PM -
Homing switch's not working correctly
By Barefootboy4 in forum DIY CNC Router Table MachinesReplies: 10Last Post: 01-20-2010, 08:42 PM -
Replaced encoder, replaced cable, still can't get 4th axis working
By ralph@nes in forum Haas MillsReplies: 40Last Post: 02-08-2008, 12:03 AM -
Help with limits not working when homing
By dave70 in forum Mach MillReplies: 5Last Post: 03-22-2007, 05:46 PM
Posting Permissions
