[mlaws1172]

A friend has ask me to put together a bolt together kit for him, based on these plans. If anyone else is interested let me know.
mike laws

[scott wiggins]

A friend has ask me to put together a bolt together kit for him, based on these plans. If anyone else is interested let me know.
mike laws

I would be extremely interested in this version if you do it. I have looked and can't find anymore information about this version.

Thanks,Scott

[mlaws1172]

Scott
I did put one together but I did not draw up any plans. Sorry. I would draw something up but I am in up to my neck right now. I will help any way I can
mike

[scott wiggins]

I have successfully printed the plans out but there is still way to much information on each sheet to read. Is ther any way to separate the drawings? Also did you ever get the wiring finished?
Sorry for all of the questions. I am a real noob at CAD and am trying to learn.
Scott

[joecnc2006]

If you are using acad or other cadd program, descide what Items you do not want to see on your plot then use the layer freeze, and plot it out then use the previous layer button and then do the same thing for all the sheets, and it will not be so cluttered. (this will only work if the person who created the file set the layering up properly, or you can creat your own and put the items in the accordingly.

Joe

[Southafrica74]

Are you still making the plans

[Weldtutor]

Are you still making the plans

The first post on page 1 of this build log gives a link to click on to download the plans by M Laws.
After download of the plans you need to unzip(decompress) them.
Additional posts on the first page tell how to unzip so the plans can be read or printed.
READing all the above untill you understand should help.