Originally Posted by
lfe011969
John, thanks for your help. I'm just learning myself and I just figured out why I haven't been able to cut. There was a switch in the back of the step-up power transformer that was switched to 110V instead of 220V so even though I had the laser plugged in to the 220V outlet in the front, the whole unit was only getting 110V. Flipping it to 220V corrected that issue.
Still at issue for myself is the new problem concerning movement on the Y axis. Whatever I've done has caused the laser to only move in the Y- direction. Pushing up causes it to move down. Pushing the Datum button still causes the laser to move back to the origin.
I'm also getting "Soft Stop" and "Limit Stop" errors when I try to operate the laser. I've tried resetting everything and I've even reinstalled the software. I still get an error during installation but the software still seems to work.
Lonnie