The machine is a bmc30 ssm from around 97. As some of you may have read in my other posts over the years its been no end to my heartache.
My newest question is this. How do I test the power supply on the left side of the cardrack. On the top left corner of the cardrack there is a board with test points on it. The points run up and down. There is one at the top and then a space then four more points below that. My problem is where to put the com lead from the meter in order to test. Also what should each point test for voltage. I'm lost so how would you guys do this.
One more question also. The main power coming in for my three phase supply to machine. There are three wires and a ground. The wires have voltages of 120v , 120v , and 220v. How do I know if these are run correctly to the machine. I have run the machine the way its wired now before it stopped working. Does that mean it should be right?
Thanks for everyone's help.(i know its my lack of understanding that's my biggest obstacle)
Judleroy