Okay, So the bearing inside the Stepper I have is shot, I cant find the bearing so I have to replace the Motor itself, the company that sells the cnc kit I have says it's 250$ to replace the motor, this after I find the same (almost) motor for 70$ online.

My question is/are "are these differences enough to warrant biting the extra 180$?


Original - > replacement
269 oz-in - > 269 oz-in
2.1A/P - > 2.0 A/P
1.7 Ohm/P - > 2.0 Ohm/P
8.0 mH/P - > 6.8 mH/P


Additionally it seems that the original motor is a 2 phase 4 wire, and the option is 2 phase 8 wire, will that play havoc with my driver?

*begs for help*