I’m new to CNC Programming. I am trying to work out speeds and feeds of a 7 tooth carbide milling cutter. The material is mild steel.
The information on the carbide inserts are:-
Vc (m/min) 350 – 150
Fz (mm) 0.05 – 0.15
Ap (mm) 0.1 – 2.0
Dia 63mm

Using formulas I have worked out the following

Vc = 150
Fz = 0.15
Ap = 2
Teeth = 7
Dia = 63

RPM = 793
Feed = 833
It would be much appreciated to have a second opinion on these results before I start machining.

Many thanks.