Hello,

I'm working with mill/turn for a lathe and most of my work is on the faces of the part (0,90,180,270 of a 41x41x900mm part). I'm having an issue when rotating operations to work on each face.

For example if I start at 0 and use the rotate option in transformation to rotate the a-axis by 90 degrees for each operation, the G-code will spit out (0,-90,180,90) instead of 0,90,180,270.

It seems to work when using 4-axis rotation with a single rotation for each operation but I don't use that at the moment (I pretty sure it also has an issue I'm not happy with but I can't remember it at this time).

Any input would be very helpful. If what I've said isn't clear, just let me know and I'll try to clarify the problem.

Regards