hi ,
I am running an old ultimax vmc and using mastercam 8 hurco post . I get a movement out of travel error when using h offset and D comp is not doing anything . I have run in to this in years past with another machine .
does anyone know why this is ?
thank you
tony
Results 1 to 8 of 8
Threaded View
-
02-22-2015, 01:01 AM #1
Registered
- Join Date
- Jun 2009
- Posts
- 195
nc config not right , dia comp and height off set don't work
Reply With QuoteSimilar Threads
-
Torch Height Control recommendations to work with Powermax 600
By CATCH22 in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 9Last Post: 04-22-2020, 02:38 AM -
Why the height sensing control donot work and without repeating the heating ...
By Steel Tailor in forum Other Machine TopicsReplies: 0Last Post: 10-11-2014, 03:46 AM -
Cutter Comp on a Helibore? Does it work?
By elaganis in forum Haas MillsReplies: 3Last Post: 09-08-2009, 05:51 PM -
X2 Slot mill and cutter comp. don't work?
By foxsquirrel in forum MastercamReplies: 0Last Post: 04-20-2008, 10:15 PM -
Ballnut backlash comp - will this work?
By fatal-exception in forum Linear and Rotary MotionReplies: 2Last Post: 11-12-2007, 04:03 PM
Tags for this Thread
Posting Permissions
