[ecoworld]

Hello
I have a Chinese cnc router with a clone 0501 controller which is having some issues. I have decided to change it to an Original Richauto A11 or 741 controller.
Has anyone done such an upgrade or have some pictures of the connections on these controllers.

1. My 0501 controller step motor connection have 3 wire on Z axis 5V, Dir and Pul) and only 2 wires on the X and Y from motor driver connections (DIR and PUL). Should the X and Y connection on the controller have 5V connections.
2. The a11 have 2 long connectors for the limit switches and spindle, can anybody guide me how to connect these.

Thanks

[pankniru]

If your controller is too old, let me retrofit it with new syntec controller contact me at [email protected]/ +918168294379 (whatsapp)