Daewoo Puma 200 with left and right spindles and gantry robot. We lost all parameters. We put in manually the 9000's and loaded back right and left parameters plus dgn. files from original backups.
I presume that normally for the loader (robot) parameters we would put the toggle switch to loader and proceed to reload the parameters for it but actually the loader panel is not active at all ! Is it because we are missing an option parameter on the lathe side? Would anyone know where I went wrong?
Need help please!
Thread: loading parameters help please!
Results 1 to 2 of 2
-
09-28-2014, 04:12 PM #1
Registered
- Join Date
- Oct 2010
- Posts
- 7
loading parameters help please!
-
10-07-2014, 07:44 PM #2
Member
- Join Date
- Jul 2005
- Posts
- 380
Re: loading parameters help please!
I will need the serial number of the machine as well as controller make/model.
Reply With QuoteSimilar Threads
-
DGN parameters Nakamura Tome TMC15M Fanuc OTC PMC-M how to enter PMC parameters?
By roymanvega in forum FanucReplies: 3Last Post: 10-22-2020, 09:20 PM -
UP loading parameters to the 5T
By Paul Pippenger in forum FanucReplies: 5Last Post: 01-21-2009, 09:27 AM -
HELP - loading parameters with a PC to a ge fanuc om
By alexh86 in forum FanucReplies: 12Last Post: 10-20-2008, 08:30 PM -
Need Help loading Brother TC22A Parameters
By toolnuts in forum CNC Machining CentersReplies: 0Last Post: 08-28-2008, 05:47 AM -
Down/up loading offsets
By JPann in forum DNC Problems and SolutionsReplies: 0Last Post: 03-22-2004, 03:17 AM
Tags for this Thread
Posting Permissions
