I'm trying to work out if the 2 lists I found in my machine are it's parameter lists?
1 list starts N00000 and go's to N19749 and the 2nd one starts at N9920 and go's to N9990. It's an OI-Mate MB
Rick
I'm trying to work out if the 2 lists I found in my machine are it's parameter lists?
1 list starts N00000 and go's to N19749 and the 2nd one starts at N9920 and go's to N9990. It's an OI-Mate MB
Rick
Thank, the machine is running alright now I found these when I was cleaning it up.
So if the N9920 up to N9990 are options for the machine, how do I find out what they are? I could not find them in the manual I have here.
0-series has option parameters starting at 900.
options are top secret and the admin does not want it discussed here publicly.
see the sticky post at the top of the Fanuc forum for info about that.
Don't think the option parameters are ~900 on a 0i control. Should be 9000 series, but the ones you are asking about I believe are for the newer motor tuning for high speed. I'd have to look next week, no 0i manuals here.