Hi there, I am admittedly new to both SolidCAM and the Bridgeport machine I am using atm. I am attempting to get a small part file from Solidworks to the CAM programme and then use the machine to mill it. My problems have arrised from the fact that I do not have the post processor for the machine or the Heidenhain TNC 310 control I am using. I cannot get from SolidCAM to the machine. I would really appreciate any help finding this post processor and also any general help with using these programmes that are very new to me.
Thread: CNC help
Results 1 to 2 of 2
-
12-10-2009, 02:25 PM #1
Registered
- Join Date
- Dec 2009
- Posts
- 1
CNC help
-
12-11-2009, 02:48 AM #2
Registered
- Join Date
- Oct 2004
- Posts
- 48
I have attached a post for a TNC 355 which will work no problem with your TNC 310. Let me know if this works. I have assumed its just a 3 axis machine but if its is 4 axis I have a post for that to!
Jake T-B
Reply With Quote
Posting Permissions
