Does anyone have the dimensions for a Bridgeport Series I feed nut bracket? I want to convert my machine to ball screws, and would prefer not to tear it apart just to measure the dimensions. I am willing to make a new bracket if necessary to accomodate the ball screw nuts, but if I can will try to adapt them to fit the stock bracket. I am considering using Roton ball screws however they do not offer 1.25" ball screws to match the Acme screws that came with the machine. I am considering using 1" ball screws instead. I have considered buying a complete kit from Rockford Ball Screw but it costs considerably more.
I can handle CAD files for AutoCad 2000 if that is what is available.
Results 1 to 1 of 1
-
01-31-2011, 01:29 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 92
Bridgeport Feed Nut Bracket Dimensions Needed
Reply With QuoteSimilar Threads
-
Bridgeport Boss 6 Dimensions
By Ryan_m83 in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 12-02-2010, 04:10 AM -
FLATTED SHANK ENDMILLS DIMENSIONS NEEDED !
By nickmodelmaker in forum CNC ToolingReplies: 1Last Post: 11-15-2010, 01:59 PM -
Dimensions of mounting holes on X2 column bracket.
By TXFred in forum Benchtop MachinesReplies: 4Last Post: 08-06-2010, 01:40 PM -
Porter Cable router motor dimensions needed.
By danmickey in forum DIY CNC Router Table MachinesReplies: 3Last Post: 12-28-2009, 02:25 PM -
Nema 23 Mounting Bracket Dimensions
By Sanghera in forum Stepper Motors / DrivesReplies: 3Last Post: 07-28-2004, 11:41 PM
Posting Permissions
