I cannot seem to find the conversion for kg-cm into oz-in can some please help. I have a motor that reads 4.1 kg-cm and I need to know the oz-in of the motor. Thanks for your help
Aaron
I cannot seem to find the conversion for kg-cm into oz-in can some please help. I have a motor that reads 4.1 kg-cm and I need to know the oz-in of the motor. Thanks for your help
Aaron
This may help..
there is a small program called "convert" that maybe can be found doing a search.
..also this
www.onlineconversion.com
Well I hope I did the math right. It' been a while.
1 kg=2.2 lbs
1 lb= 16 oz
1 in=2.54cm
4.1(2.2)(16)=144.32 oz
144.32/2.54=56.81 oz. in.
If it's not nailed down, it's mine.
If I can pry it loose, it's not nailed down.
Cannot think you guys enuff. And that my friends is why I think this is such a good place with good people. Post a question go make a pot of coffee and by the time your back problem solved. I have the convert program but it is very old and did not have every thing I needed to convert. Looks like its time to update.
I thank you all
Aaron
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)