[shredaz]

I'm building a CADCUT machine and need a question answered. Does anyone have a center measurement for the x axis drive shaft on the gantry upright. I didn't see one on the plans. I could be overlooking it.
Thanks shredaz

[ninewgt]

Shred -

I sent you new DXF files...

Let me know what else you may need or call me

Tom

[shredaz]

Just got the files thank you

[cspearsall]

My friend and I ordered a set of plans the other day, and after we reviewed them we noticed some missing dimensions and pages. There was no instruction book with pictures included in the e-mail attachments. There is an instructions zip file but it only had the same set of drawings as in the main attachment. The parts list has pieces from specialty motions, but no part numbers, do you have the numbers we need? One other question, there are two aluminum lists, one an order for aluminum and the other a list of aluminum needed, they are different, which one is the proper list.


Thanks in Advance for your Help,

Christopher

[ninewgt]

Christopher

Send me an email - [email protected]

Ill get ya the missing stuff...

Sorry about that ! - Dont worry - Im here to help !

Tom :cheers: :cheers:

[cspearsall]

Tom,

I have to apologize. I found the file in the instructions directory (of all places!!) Thanks for the reply. Sorry

Christopher

[shredaz]

Troy at Specialty has a file with a list of parts but if I remember right its short 2 z pillow blocks and my z axis screw came out 1inch short on the screw part.