OK. So I designed a disc in solidworks, saved it as an .igs and loaded it into surfcam. The disc is a simple cut, I wanted to do a z finish pass just to zip the part out. (HDfoam) BUT, the cutter path wants to run on both sides of the surface and not ON top of the surface. I have all of the direction surface arrows in the right spot but.....? What am I doing wrong?
Results 1 to 4 of 4
-
11-21-2012, 06:06 AM #1
Registered
- Join Date
- May 2012
- Posts
- 0
so simple but...I cant do it (2002 surfcam)
-
11-21-2012, 02:26 PM #2
Registered
- Join Date
- Apr 2003
- Posts
- 637
What does this mean? Sounds to me like you just want to do a 2D contour cut but you’re trying to do it in 3D. Can you attach the igs file for us to look at?
Originally Posted by Levtech
-
11-21-2012, 06:38 PM #3
Registered
- Join Date
- May 2012
- Posts
- 0
My bad, it is more of a 3D hubcap than a flat disc. I will post the .igs tonight.
-
11-26-2012, 08:13 PM #4
Registered
- Join Date
- May 2007
- Posts
- 80
And then what happened?
Later,
Charlie
Reply With QuoteSimilar Threads
-
Gibbscam 2002 help
By missionrat in forum GibbsCAMReplies: 4Last Post: 10-24-2012, 02:56 PM -
autocad 2002 question
By mcraig79 in forum AutodeskReplies: 1Last Post: 11-18-2008, 01:36 AM -
Large Files and a VF-1 2002
By frogger in forum Haas MillsReplies: 10Last Post: 10-07-2007, 01:45 AM -
AutoCAD 2002
By ajl6549 in forum AutodeskReplies: 10Last Post: 08-02-2006, 06:35 PM -
ACAD 2002 issues????
By DanFri in forum AutodeskReplies: 4Last Post: 07-02-2003, 07:16 PM
Posting Permissions
