What is the easiest way to exit into the DOS Command Prompt window from the EZ-Path program? Or is there a way to get there during the Boot sequence? I know you can press DEL to exit into the Set-Up screen during boot up. I want to eventually get to the A: directory.
Thread: EZ-Path Command Prompt
Results 1 to 3 of 3
-
05-06-2015, 11:18 PM #1
Registered
- Join Date
- Jun 2005
- Posts
- 104
EZ-Path Command Prompt
-
05-08-2015, 03:03 PM #2
Registered
- Join Date
- Jun 2005
- Posts
- 104
Re: EZ-Path Command Prompt
Bump
-
01-21-2016, 08:01 PM #3
Registered
- Join Date
- Jul 2007
- Posts
- 45
Re: EZ-Path Command Prompt
I have an EzPath II but this should be similar. Go to <9> Utilities <4> Comm. Press Control C then <Y> to terminate batch job.
You should now be in the C:\Ppath directory. Then of course type A: to get to A:. To get back to the EzPath screen type <ezpath>. All typing is without the <>. Just in case, pressing control C is holding the control key down and hitting the c key.
Reply With QuoteSimilar Threads
-
dx32 motherboard replacement now just a c prompt
By laserh20 in forum Bridgeport / Hardinge MillsReplies: 17Last Post: 10-30-2013, 01:08 AM -
Bootup Problem (Command Prompt)
By genebaq in forum MilltronicsReplies: 3Last Post: 10-30-2012, 07:57 AM -
No Tool change prompt
By prestondocks in forum LinuxCNC (formerly EMC2)Replies: 2Last Post: 07-09-2011, 08:27 AM -
DOS Prompt ?
By Andre' B in forum OpenSource SoftwareReplies: 5Last Post: 09-05-2008, 01:26 PM -
User Prompt Help
By Garett_bout in forum G-Code ProgramingReplies: 1Last Post: 02-11-2005, 06:31 PM
Tags for this Thread
Posting Permissions
