Geckodrive G540 Multiaxis Step Drive
I Have two, fresh units with test result paperwork from Geckodrive. $190 plus shipping per each unit. ($100 savings)
The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 connectors.
It contains four G250 drives, an integrated breakout board to control a router or plasma torch, and a hard anodized aluminum case.
Four 10-Microstep motor drives
0 to 3.5A rated phase current
18VDC to 50VDC supply voltage
Mid-band resonance compensation
Auto standby current (70% current)
Optoisolation on all LPT signal pins
Two 1A at 0 to 50VDC rated outputs
Four SPST to GND inputs (TTL)
FAULT indicator LED,signal to PC
POWER indicator LED
I-SET resistor on motor connector
TRIM adjust for motor smoothness
Panel mount (5.7? by 2.4? hole dim.)
Anodized aluminum package
10kHz watchdog timer (charge pump)
Optoisolated analog output for a VFD drive
List Date: 6/29/2015
For more info, click here to view the original listing: Geckodrive G540 Multiaxis Step Drive
--------------------------------------
On Sale For: $207.14 + $10.00 Shipping
--------------------------------------
Mobile friendly version: Geckodrive G540 Multiaxis Step Drive
Go Mobile: Download the free Panjo iOS app now!