Here is a bit of code done by hand. It completes line 380 then stops on the peck drill giving improper use of a decimal error.
N320 G28 U0 W0
N330 (TOOL 5 .625 DRILL)
N340 T0505
N350 M03 S800
N360 G00 X1.6 Z1.0
N370 X0.0
N380 Z.050
N390 G99 G83 X0.0 Z-1.593 R.1 F.006 Q.250
N400 G00 Z1.0
N410 G00 Z1.0 X1.6
N420 G28 U0 W0
I know it's something simple but I am overlooking it.
Any ideas?
Thanks in advance!!