I am just setting up a Bridgeport, that had an old Anilam controller, with a new Galil card.
Does anyone have any idea of acceptable or typical maximum acceleration and deceleration settings for these mills?
Results 1 to 3 of 3
-
07-11-2014, 11:28 PM #1
Registered
- Join Date
- Jul 2014
- Posts
- 25
Typical acceptable table accelerations?
-
07-12-2014, 01:15 AM #2
Member
- Join Date
- Jan 2005
- Posts
- 15362
Re: Typical acceptable table accelerations?
Is this a Boss series cnc machine or a regular series 1 that was converted to cnc
Originally Posted by tonyfoale
Mactec54
-
07-16-2014, 08:33 AM #3
Registered
- Join Date
- Jul 2014
- Posts
- 25
Re: Typical acceptable table accelerations?
Regular series 1 with the longer table. Originally Posted by mactec54
Reply With QuoteSimilar Threads
-
What's a typical number for bore runout for a 6" rotary table?
By Nelson_2008 in forum Benchtop MachinesReplies: 14Last Post: 07-24-2012, 01:46 PM -
Accelerations in Mach
By mcphill in forum MikinimechReplies: 1Last Post: 12-14-2011, 11:40 PM -
typical cutting force
By dbsharp in forum DIY CNC Router Table MachinesReplies: 8Last Post: 12-04-2011, 11:32 PM -
Typical Backlash on a new Yuasa 8" Rotary Table
By Roy Norris in forum MetalWork DiscussionReplies: 5Last Post: 08-10-2005, 10:33 AM -
Typical power supply
By ynneb in forum DIY CNC Router Table MachinesReplies: 0Last Post: 04-27-2004, 03:06 PM
Tags for this Thread
acceleration,
acceptable,
anilam,
bridgeport,
card,
con,
controller,
deceleration,
galil,
hat,
idea,
ing,
maximum,
mills,
roller,
set,
setting,
settings,
tuning,
typical
Posting Permissions
