Hi,
I want to connect a delta inverter drive with Fanuc 0i-MD control....
I have already connected the drive and it is working for Forward, Reverse and Stop commands(MO3, M04 and M05) which is given to the drive as a output address Y0.0, Y0.1, Y0.2. Now i am not able to control the speed through the NC control. How to interface the drive with the control for speed control.
Please help....
Results 1 to 3 of 3
Threaded View
-
04-25-2012, 11:10 AM #1
Registered
- Join Date
- Oct 2010
- Posts
- 131
Connecting Delta spindle drive with Fanuc 0i-MD control
Reply With QuoteSimilar Threads
-
Connecting to Ethernet with Fanuc 0i-MD control.
By wolfmanp in forum FanucReplies: 2Last Post: 04-10-2013, 01:07 PM -
can use vector drive for control router spindle?
By bel630 in forum DIY CNC Router Table MachinesReplies: 11Last Post: 12-08-2012, 11:35 PM -
Connecting a breakout board to spindle speed control
By waisberg in forum Commercial CNC Wood RoutersReplies: 3Last Post: 10-25-2012, 08:04 AM -
FANUC OT B Spindle rpm fluctuating and causing 1008 Spindle Drive Fault
By Bill Gillen in forum FanucReplies: 4Last Post: 10-15-2010, 07:10 PM -
Delta 3 phase and Fanuc control
By scadvice in forum FanucReplies: 4Last Post: 01-13-2009, 09:15 PM
Tags for this Thread
Posting Permissions
