[hamzagi]

hello,

I want to know which kind of systems is used behind in order to bend metal.

press or motor?

any schema or project log will be welcome

I appreciate so much your help
regards

[iwaskevin]

https://youtu.be/cvT7szBG05U
servo motors

[hamzagi]

thank you for the reply
do you have any idea about the caracterstics of the servo motor ?

[awerby]

It depends on what sorts of things you're trying to make. For an old-fashioned but versatile and effective solution, look up the Hossfeld bender; with the right accessories, you can do all sorts of bending tasks: Tube Bending Machines | Metal Benders & Bending Dies | Hossfeld UNIVERSALâ„¢ Bender, Winona, MN

[hamzagi]

It depends on what sorts of things you're trying to make. For an old-fashioned but versatile and effective solution, look up the Hossfeld bender; with the right accessories, you can do all sorts of bending tasks: Tube Bending Machines | Metal Benders & Bending Dies | Hossfeld UNIVERSALâ„¢ Bender, Winona, MN

thank you

but i want to have an idea about the needed parts in order to make a homemade cnc bender. i have an experience with cnc tables

[awerby]

Again, if you're asking us for a list of parts required to make a bender, you either have to show us a design, or at least specify what you want to bend and how.

[hamzagi]

Again, if you're asking us for a list of parts required to make a bender, you either have to show us a design, or at least specify what you want to bend and how.

hello

I want to bend the concrete iron as you can see in the attached image.
for the method, i prefer to use the same method as the one shown in the video below.

thanks

[whiskeymike]

Try these.... DIWire Bender Make Your Own CNC Wire Bender | Make: DIY Projects, How-Tos, Electronics, Crafts and Ideas for Makers

It's motor driven.