587,517 active members*
3,488 visitors online*
Register for free
Login

Thread: Z over lag

Results 1 to 2 of 2
  1. 10-10-2007, 10:15 PM #1
    gls48
    gls48 is offline Registered
    Join Date
    Jun 2007
    Posts
    4

    Z over lag

    I have a CNC knee mill with an Anilam 3300M control system. We are primarily using it for pattern drilling at the moment. On occasion it will shut down at some random point in a run. It seems to happen most when the quill is feeding into the part, especially when the bit starts to get dull. The message is “Z over lag" or something close to that. I am wondering if the sensor may be dirty of fouled. If anyone has experienced this I would like to know what you found.
    Thanks,
    George
    Reply With Quote Reply With Quote
  2. 02-25-2008, 03:05 AM #2
    dr.carnage
    dr.carnage is offline Registered
    Join Date
    Feb 2007
    Posts
    1

    X over lag

    I was wondering if you ever figured out the problem? I just started experiencing a similar problem on an Anilam 1100, my X-axis jumps around and gives me an "X-Axis Over Lag" error.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules