I haven’t posted here for awhile. Thought it would be good to show what I’m up to these days.
Here’s a look at the guitar I’m currently working on, the KOZM “Performer LS”.
Custom hard-tail bridge.
Non-floating magnetic pick-up.
24.75” scale length.
Body woods, front: Alaskan yellow cedar, torrified maple, big leaf maple in the middle.
Body wood, back: Mahogany
Attachment 246984
Attachment 246986
Attachment 246988
The elliptical hole is for inserting the strings through the hard-tail bridge system.
Attachment 246990
Attachment 246992
The knobs are 3D printed (Objet). The left, tone knob will be a push-pull - which will toggle the Joe Barden S-Deluxe mini-humbucker from "coils in parallel" to "coils in series".
Attachment 246994
Here's a cutaway view of the body, showing the support structure for the non-floating p-up mount. Mounting the p-up from the back of the guitar should reduce the amount of feedback, and not weigh-down or hinder the soundboard from vibrating.
SolidWorks, VisualCADCAM (MecSoft), ShopSabre CNC, WinCNC
All comments and questions appreciated.
Cheers,
Jeff Kosmoski
KOZM Guitars