Hi guys and experts
After loosing references ( X,Y,Z - alarm #300 axis need REF ) I tried to fix
this problem by a help of some information that I got from a Fanuc technician
( step by step = MDI --> buton OFFET SETTING --> set write enable to 1 --> buton SYSTEM -->
dialog window PARAM --> 1815 NO SH --> APC APZ --> set APZ to 0 --> OFF/ON -->
manually axis to zero position --> change APZ to 1 and so on...
Well , I did it for Z axis first , everything was ok, I got rid of 300 alarm of Z ,
Then I started next step for X axis , but instead of PARAM --> 1815 --> NO SH
I started to search 1815 before I jumped into PARAM mode , so I could not get into
1815 parameters (I did not notice I am not in parameter setting menu )and I pushed
buton INPUT in this time
From this I can not get into dialog menu with PARAM DGN etc by pushing butun
SYSTEM . I switched machine ON/OFF a couple of times , tried lots of combination of
pushing lots of butons , without of success.
It seems like buton SYSTEM does not work . It does , but never into PARAM mode .
Is it possible to block buton SYSTEM by inputting some wrong number ?
Anything was lost ? Anything made some mishmash inside a system?
Did I jumped into something that I do not know how to jump out ?
I do not understand ...
What can I do ? I have a backup consist of 6 files ( DAT,DGN,LAD,PHL,PRG,PRM)
Could you give me any advice ? thanks a lot