[querencia]

Hello, although there is no error on the code I wrote, it gives the error "2649 N 0 CALCULATION SYNTAX-ERROR" when we enter the machine. For 2 weeks we could not solve this error. Can someone help?
Machine model : concept turn 250

Code:
N5 G90 G71 G80 G40
N10 T1010 M4 S2250
N15 G0 X30 Z5
N20 G73 U0,2 R0,3
N25 G73 P30 Q180 U0,1 W0,1 F0,6
N30 G1 X6,25 Z0
N35 Z-6
N40 X7,25
N45 Z-6,8
N50 G2 X7,45 Z-7 R0,2
N55 G1 X7,75 Z-7
N60 Z-7,4
N65 G2 X7,95 Z-7,6 R0,2
N70 G1 X8,25
N75 Z-8,6
N80 X8,30
N85 G3 X8,20 Z-8,7 R-0,1
N90 G1 Z-8,8
N95 X8,35
N100 Z-9,05
N105 X8,25
N110 X8,80 Z-26,3
N115 G2 X8,9 Z-26,4 R0,1
N120 G1 X9,25
N125 Z-26,6
N130 X9,30
N135 G2 X9,15 Z-26,75 R-0,15
N140 G1 X9,15 Z-27
N145 X10,37 Z-41,67
N150 G2 X10,57 Z-41,87 R0,2
N155 G1 X11,37 Z-41,87
N160 G3 X11,67 Z-42,17 R0,3
N165 G1 X11,67 Z-43,62
N170 X11,61
N175 G2 X11,51 Z-44,12 R-0,5
N180 G1 X12,32 Z-49,92
N185 M4 S3000
N190 G72 P30 Q180 F0,4
N195 G28 U0
N200 G28 W0
N205 M5
N210 M30

[Species8472]

Try adding "," 's to this line like this. ------>N15 G0 X30, Z5, and any other place you have a coordinate that is not "0" and has no trailing "0".