Hi everyone, need a little help i have a client that wants me to create an animated file from 2014 solidworks that he can then use to show potential buyers of his products from his facebook page, i...
Type: Posts; User: functionbikes
Hi everyone, need a little help i have a client that wants me to create an animated file from 2014 solidworks that he can then use to show potential buyers of his products from his facebook page, i...
Actually what i was asking is where in the tools page on the controller do you set the diameter.i know where on a haas tool page to set the diameter.
Hey, everyone could use a little help i currently run a supermax max 1 rebel machining center , would like some help in finding where you find the page that controls tool diameter.
Thanks in...
Hi everyone, the shop that i work at is having problems with the com settings in mastercamX6 we had it running then windows 7 did an update and every thing went south on us. need a little help here
when you are writing the tool paths and you are switching between the sides do you keep the same work offset then shift the work in a0.0 to start then rotating the workpiece to a90.0 and son on.
Hi everyone , i have been using mastercam for quite sometime I know how program in 3d, but the company that i now work wants me to program in 4 using a 4th axis , i have spent alot of time trying to...
the plates are 15 long 8 wide and 8 tall, the material was supplied, was told it was cast iron, these are for an aluminum foundry
HI everyone, I just got thru a job machining a mold for a customer and I got taken to the cleaners for the cost of the job, was underbid mostly from the start, what is the average feed for cast...
I have a series 1 pcnc1100 that keeps losing position in z it is climbing out of the part while 3d surfacing, the sounds coming from the column.any ideas would be great for what to look for.
...
the wear button works it generated the g41 code in the right places- thanks for walking me thru that
I am posting out of matercamX for the tormach and have the cutter comp turning on during the ramp in move, mastercamdoes not seem to want to put the g41 in,
The length in Z is good, my issue is with side compensation
I wrote a simple program
Am I not seeing the problem
N102 G0 G17 G40 G49 G80 G90
( 1/2 FLAT ENDMILL TOOL - 1 DIA. OFF. - 41 LEN. - 1 DIA. - .5 )
N104 T1 M6
N106 G0 G90 G54 X-1.8529...
I know that this has been gone over before, I am trying to figure out why my machine does not recognize my cutter comp from mastercam X , what am i doing incorrectly
Ok so i feel really stupid for asking the question
For the life i cannot remember how to get the jog pop up screen to come up in mach 3, which key do I hit on the keyboard:drowning:
Hey everyone, I have the 1200oz steppers- got them wired up and was wondering if they have 200 steps per revolution?I am using mach 3 for the controller- a little help here
I will post the code later on this evening, I am posting out of mastercam x with a standard fanuc post
I was running my tormach trying to use cutter comp g41 to turn on cutter compensation , in the tool offset page I select my tool in the dia column I subtract -.00x. After all this it still will not...
well I got everything in order- it turned out that i had the step and the pulse wires switched- i feel really stupid i did not catch that one on all three axises(wedge)
Jeremy little- ogd manufacturing
[email protected]
Hello everyone, I really did not want to write this but I am really at my wits end with the system that I purchased from kelling - I purchased the 1200oz nema 34 cnc 72v system, from the get go it...
I would do that if I was farther, I am having trouble getting the rails to lay flat in the horizontal plane, I currently have them within .015 over a 5 foot span in both x and y
Anyone, Bueller?,Bueller?
I was wondering i anyone on here can help me out with some questions, for the past3 months i have been building a 3 axis gantry router with a 4x4 work area I have used 25mm linear rails on x and y...
Just emailed you
email sent
send me a file and I can quote to [email protected]
Thanks
jlittle
I need a little input here, could someone tell me where in the mach software do you assign the jog for .001,.010,etc am i missing something
Well, I got the problem resolved it turned out to be a connection going from my motor to the cable was not soldered properly.