Thanks, I will download it and give it a try.
Type: Posts; User: Rick_B
Thanks, I will download it and give it a try.
Hi Stutank,
Will your Ezilathe program work on anything other than Mach3?
jmweng, what controller is on your Extron? I know with the cable for mine I had to make one, none of the shop-bought cables worked. I also use a Titan DCN on my Extron and I have had no trouble at...
OK, what are you doing to load your program? what happens after you try to load your program?
Fanuc IO-mate -MB it was pretty much plug and play.
I replaced my shoplink, just could never get it to work right I ended up changing it over to a Titan DNC and have never looked back. That was 3yrs ago now and it is still going strong.
I am trying to turn down the extra stock (which was in the chuck) when I flip the part. Is there an easy way to do this? In SC turn you do not seem to be able to move part Zero.
Andrew,
I run a refrigerated air dryer as part of all my setup as well as the Sharpe 6760 Desiccant dryer systerms. In 2000 I started out with a Plasmacam 4 x 4 with a 1650 Hypertherm, then I...
HAHA, that is so funny!
Yer I know what "Production" speed is and you would be even pushing to get it with a XP45 on 5mm. I was more interested in what he was offering for $45K, considering the one I have been looking at...
Here? USD? AUD? what is the max thickness it will cut?
Andrew,
If you are looking at buying a CNC table/machine, stay right away from ART machines!
Thanks, I will install it and have a play with it. Is there any more information on how to use this?
Is there any way to change the G76 and G92 lines of code from negative to positive without doing it manually?
N11 G76 X-14.186 Z-20.159 P1227 Q100 F2.
anzory, Thanks for that.
Do I add this to the GPP or Find it in the GPP and modify it ?
Is there a way to change from X negative to X positive without placing the tool on the opposite side of the part?
I know this is an old one but, how do I adjust the lathes working area and where is it found?
mflux_gamblej,
I was wondering how you went fitting it. But I may be interested in the HPA, do you have any pictures of what you have?
mflux_gamblej, Did you ever get the HPA arm put on your Lathe?
Hood,
Sorry, my pm's are not working for some reason.
Hi,
Did you get any were with this, I'm in the same boat.
turbocad6, if your still around, who are you talking to at Newker?
Well my install of the SZGH CNC1000TDb on my lathe is chugging along and I'm down to the last few things. It probbely would have easier if had knowen a bit more about electronics,
After getting...
Hood,
Question. With the CN5 driver plug, I have wired it the way Mike said but when I plug it in to the controller and the servo drives the controller will not power up, but it powers up no...
Hood,
I check it against the board I have on the lathe and the pin layout looks the same. Looking at the one CNC-makers sent me, I think its more connection options.
Thank you for that, the one they email me the other day was nothing like that.
Yes, that seams to be what is happening. I probably not helping ether by not really knowing what I'm doing.
Yer, I have been talking to him the last few days, but I have ended up more confussed now than when I started.
My turret is a JLD6 from CNC-Makers. It was on the lathe when I got itand was working. I have very little info on it, I know it only rotates in CW and the board has relays on to supply 380v to the...
OK, can I go direct from the CN4 port on the controller to the board that runs my tool turret? thats how it was wired on the old controller.
The DB15 pin lay out is pritty well the same with the...