Search:

A_Camera, When I say we, meaning the company that I work for being an agent and authorized reseller and trainer for ArtCam. If anyone of us suspect an illegal version is being used we will challenge...

Yes, I’m sorry I should have used the word suspicious not assume.
When a new user pops up with an old version that’s not available to purchase but found on certain software sites then there is...

When someone surfaces using a 12 year old version that’s not available for purchase and cannot do the simplest of task then a big red flag goes up. If your boss has owned the software since 2004-2005...

Since you keep blocking out the licensing info, then we have to assume you are using illegal software which you did not purchase from Delcam or a certified reseller. Version 7 has not been available...

Thats only a part of the help about box, post the full dialogue box and the help about dialog box from the demo version
Gary

post an image of the help about screen for the version 7 and the demo version
there's a big difference between these versions and builds with the layout and way things are done.
Gary

Gerry's response of profile toolpath then run a roundover tool would be the most efficient.
What version and build of AC pro are you using? there is another way to use a profile toolpath and get the...

Viktor has answered that one in the in the simulation post below
Gary

Gerry is correct switch the ij mode to incremental.
you must be on an old version & post as the mach3/4 post p forces the change in mach
Gary

what version and build are you using ?
is it the downloaded demo version or have you purchased a license?
Gary

Contact your Artcam reseller for an updated or customized post p
Gary

spiral in 2013 that I'm toolpathing tonight
Gary

When I say yes its in all versions, I mean the current versions.
you are working in a 6 year old version which may or may not have it, I recommend you contact your reseller for support with this....

As Vicktor answered, no it doesn't
Toolpath tolerance is a tolerance setting for how closely the toolpath will follow the vector. the lower the tolerance the closer the toolpath will be to the...

yes, you can do it all versions.
Gary

Mike, hard to say without seeing your vectors or file
if you can't post them then your welcome to send it to me look at for you.
Since they are in the simulation then they are in the file, I would...

You need to vectorize then use the vectors to create the shape & detail, invert in Z, then put a draft on to finish.
As to what tools and method you use will depend on which version of ArtCam you...

Have you contacted your reseller?
they are your first line of support. are you running as admin?
Gary
Beckwith Decor Products

You don't say which version and build your using, but in general there is no auto feature to do this, fillet only works to the inside so would not work in this case.
circle, copy paste then weld...

artcam.com
Gary
Beckwith Decor Products

change your toolpath strategy (rastor angle to 90°) or your origin point so your start point is outside you relief area.
Gary
Beckwith Decor Products

yep that's what Artcam is good at
most of whats in that fireplace trim is straight forward and easy to create from clean (preferable high res) images
hard to tell what all is there, looks to be...

You can contact us for your ArtCam needs
Gary
Beckwith Decor Products

korakian
you must have an older version to not have it already
Just contact your ArtCam reseller, they will supply it to you and make any adjustments for compatibility you may need. As I noted...

????????
Polygon is just a 2d shape for a 3-axis router!
do you mean arcs? arcs were added to the Masterwood post processor on 10/7/2008
Gary
Beckwith Decor Products

edit: Well I guess that...

PM sent
Gary
Beckwith Decor Products

For it to be legal you must have the usb security dongle and associated paf file
otherwise you have an illegal crack copy, which I would suggest you loose!
Every legal seat of ArtCam has a...

So you have no sentinel security dongle? You are running an illegal copy of the program
Sorry cannot help you unless you purchase a legit copy of ArtCam, the current version is 2011.
Gary
Beckwith...

do you have a dongle?
Gary
Beckwith Decor Products

What version of Artcam are you using?
The current post processors for Mach is Mach3gb_inch_ arc or Mach3gb_mm_arc" with both including an ATC versions
these were updated to Mach3 in 2006 and have...