Search:

has anyone used v24 to program plasmacam machine? we just purchased 4 at work and i'm hoping i can use bobcad to post code and draw for them. i already downloaded the post processors for them. any...

good rule of thumb with metric is diameter minus pitch = tap drill size. 12-3=9mm

i've been running a milltronics partner cent. 1 for 13-14 yrs.. when in doubt call them at the plant, their great help. and your owners manual should have some practice programs. they will get you...

to run large programs on my '96 4020ht all i have to do is type DNC at the console when it says enter next command then hit send at the dnc prompt on my predator editor software ? no problems loading...

right hand threads tighten clockwise, left hand tighten counter clockwise.

see if you can find a Feed and Speeed Calculator. most tooling companies have them like sumitomo, valenite, iscar , etc.. they take the guess work out of setting feeds and speeds for cnc's. i use one...

i wrote gear cutting program for fadal and hooked laptop up. program is about 22000 lines long. what is the proper procedure for running machine from laptop? DNC mode? how is the program supposed to...

i'm not a salesman for bobcad but i will say this for them. we purchased a 92 mod. 4020ht fadal about 2 mths ago. the programming was a ***** trying to figure out on my own. i was able to persuade...

haven't checked the graphics card but how do you go about upgrading it?

i have a HP g60 with windows vista premium and just uploaded bobcad v.23 into my laptop. while going through the drawing process the system shuts down. i've been on the bobcad website and have made...

i'm wanting to cut an arc 3/8" rad. starting at point x=1.5, y=-1.25 with arc center at x=1.125, y=-1.25. the endpoint is at x=.75 , y=-1.25. start at z.05 first cut z-.075 then down to z-.2 in .125...

here's a short arc i've programmed as part of my self teaching lesson. my question is how do i modify this to start at Z.05 then feed down to z-.125 then finally Z-.2 incremently .075 without copying...

i'll check at work tomorrow. believe i have it.

try using g601. i have the fanuc control in a nardini and the g codes are all g601, g600, etc...

as far as whose the blame for the economy. the fools raising taxes on business owners and running companies out of the country. the people that forced banks to do subprime lending (and now cash for...

i believe my nardini fastrace runs on that . i'll check at work tomorrow and get back to you.

i actually enjoy the hyundai programming. got the basics from cardinal machinery then taught myself everything else. done alot of duck and turkey calls on it. my new fadal is my next headache but...

i appreciate the responses. i ended up copying and pasting 5 times to get it. i work out in the country and 100 miles from memphis. i'm trying to teach myself this format cause the owner doesn't...

we just picked up an "91 fadal vmc4020 from an auction. i don't have any tech support but ya'll and am trying to figure out the basics on my on.
the machine is in format 1, would 2 be better?
what...

i sure appreciate it.

wonder if you could use a 45 deg tool and basic g1 to do a thread like procedure rt. to left then lt to right. ?

is there a mini laptop that would be good for loading bobcad v21 into and how do i go about putting it onto the new computer if i get it. the computer it's in now is burned out but i have my disk and...