To get the bottom race out mig weld a small bead on the race. the welding will cause the race to shrink, and it will probably fall out.
Type: Posts; User: DSL PWR
To get the bottom race out mig weld a small bead on the race. the welding will cause the race to shrink, and it will probably fall out.
What machine are you doing this on?
What feeds and speeds are you using?
What is the angle of the ramp?
Are you using a center cutting endmill?
I'm guessing that the SL series is getting phased out, so they will probably use the remaining castings and that will be it. They are probably geared up to produce the new series and don't want to...
They look great!
It's probably metric.
Looks good. You should only need to change the tip, not the whole line.
Don't go for the cheap no name welders. I wouldn't even touch the bottom end lincoln mig. BW is right get a 220v model. I also own a Ready welder that may be just the ticket for you. ...
It all depends on what kind of service you will get. Both brands seem to be built well, and do a great job, when they are working... In the weastern part of North America, Mazak has terrible...
Pictures?
I like to use form taps whenever possible. No chip problems :)
Where are they made (VMC and the swiss turn?)
Almost everything is an option on a Mazak. I'm surprised they don't charge extra for the e-stop button!
A 36 is just standard structural plate, so feeds and speeds for 1018 should work just fine. The only thing that might get you is mill scale on the outside of the part (much harder and abrasive). If...
I know that Hyundai-Kia isn't on your list, but They may still have the 3 year full warranty promotion on.
www.freightquote.com
Here are the numbers I got in January of this year.
Dura 2050: $89,900
Dura 2050MC: $111,500 (Live tooling)
You should be able to knock a fair chunk off of these prices as I doubt many...
Why would you want to buy used consumables?
Haas is well known for the terrible acc/decel times. At IMTS last year they had the new ST-30, and it took a good 10 count to get the spindle up to 3500 rpm. (10" chuck) My 1996 Yang lathe spins up...
I'm using OneCNC right now. I only had very minor cad cam experiance before I bought this, but I had code good on the first day. I like it and would recomend it to anyone.
For short run parts in a job shop environment it is tough to beat a multi axis machine, even for simple, multi op parts.
BTW that is a nice video, but do you have any videos of parts that actually need y-axis?
Geof,
For simple parts the payoff isn't there. If you remember the parts I picked your brain on a little over a year ago (pump heads) you know they are a fairly simple part. I had my cousin do a...
I'd build one, but here are some links...
http://www.eastwood.com/metal-fabrication/tubing-roller.html
harbor Freight Item# 99736
I wouldn't use methanol on my machine, because it does harm many types of elastomers, and will remove all of the lubrication (yes you can ad some oil after...). So unless you know what seals are in...
3 wheel roller.
What machine do you have? The ebay link doesn't work anymore. Tell us your max cutting DOC, engagement, feeds, and speeds.
Even if your pail condenser, and filter clean up the air enough now,...
Your bandsaw won't touch carbide, but it would be fun to watch! You need to use an abrasive cut off saw. Even a zip disk will due.
I do feel for you, but you NEED CLEAN, DRY air or you will have solenoid problems forever. Your next problem is you have already fed wet air into everything, and contaminated the whole air system. ...
All that you found there was a good start...
Good luck, and I hope your 1st crash is only minor...
On mine I took out a $300 tool, so it wasn't too bad.
I have a smaller saw than yours, but it looks like I have the same cheap style of blade guide on mine. The biggest problem is the how they cheaped out on the bearing blocks. On mine the tounge and...