here's a screenshot of the paremeter page im looking at..spindle rated value, what value do i need to enter here, where do i obtain that value?270300
Type: Posts; User: dec11ad
here's a screenshot of the paremeter page im looking at..spindle rated value, what value do i need to enter here, where do i obtain that value?270300
sorry, my bad. it's an osp-p100m control
was wondering what value i enter in the "spindle rated value (sync tap)" parameter? where do i find that rating value?
vwka worked great but i couldnt find any reference to it in my manuals
does anybody know how to effectively setup synchronized tapping torque monitoring on an okuma mb56va with a 15k spindle and an osp100m control? i have it turned on in the part program but i cant...
what does the use of G92 do in this cycle? what is it different from G90?
im trying to output the probed hole positions to a new program file.
lets imagine that that i have 10 parts in a program with 4 predrilled holes per part that need to be tapped.
my tapping...
here's a neat iphone app that will calculate feeds and speeds for both metric and inch taps and lots more... Machinist Calculator SFM by ApplicationSoft
https://appsto.re/us/Jeusw.i
got the answer to my question. good thing my brother understands coding language cause i hardly expected any answer from this forum within a day....or week. so here goes, for those of you who might...
we are using the macro typed out below to handle the tool changes in our okuma mb56va mills and there's a certain behavior i would like to change.
when we run a program (cycle start) and the tool...
not sure if this is the proper place to post this question but anyhow,, was wondering if anybody would happen to know the differences between the older renishaw mp7 mp8 mp9 and mp10 probes? im...
what is the difference between okuma's synchronized tapping and synchronized tapping II?
got them working, thanks for the help!
ok, so works like my other macros for finding the center of a hole or bose feature, (both of which i have used successfully) ill explain the hole finding macro, first you place the probe inside the...
this is what i'm trying to accomplish
ok, correct me if im wrong...you position the probe next to the edge to be probed then go to the work offset page and select the offset number desired...
yes, i have done that already and assigned the .LIB programs to the macro Gcode i still had available..
so by programming it as G111 X10.525 H10, X10.525 would define the anticipated travel...
yes, figured thats just for a guide, used it on g119 cause g111 was already used. could it make a difference?
no i have not, what does x1.25 h1 do?
i am entering the cycle and data it needs to complete the cycle in mdi mode but on the xyz macros the instructions just mentioned the gcode to activate the cycle. which makes me wonder how it decides...
well i just probed about 6 holes without a problem, just cant get the xyz macros to work. also the battery is about 1week old now.
the program looks like this258862
and according to the instructions of this macro i should only have to enter g111 in mdi mode (i have it registered at g119) and alarm goes on at line call OO10
258860ok it seems like the macros were already loaded in the machine but when i try to run it i get an error saying 2308 alarm b untended: command missing 4 what am i doing wrong? i only get that...
broby, is there a guide with the other functions somewhere. i do want to start with finding the coordinate positions and will try it out asap but will most likely wish to use other functions like...
i have very little experience with probing. we just got a new used mill with the reciever unit (omm) fitted and the previous owner used an mp10 probe but had it removed. it turns out our first mill...
does anybody have the x, y and z probe cycle for an mp10 probe on an okuma mb56va with an osp100m control?
the p0 is not present in that screenshot of the tapping cycle
we just installed our second mb56va (well wired, not really finished installing) but it seems to have that same delay on the ridgid tapping cycle, well maybe a little less delay but still obviously...
i started a new thread for that topic. http://www.cnczone.com/forums/okuma/245520-okuma-mb56va-tapping.html
so what is the purpose for this feature?
nobody?
here are two vids showing both the ridged tapping and floating tapping cycles https://drive.google.com/folderview?id=0B9-X3ots4CZ7alIzT1YwbmxRbnM&usp=sharing
we bought the machine used and it was...
oops, donno what i was thinking😁 here's a pic of the tapping cycle.255762